ʻO ka hana kiʻekiʻe wili wili PM moʻo
ʻO ka wehewehe pōkole:
Kiʻekiʻe kiʻekiʻe honua machining PM Series 4-flute palaha hope wili me ka pololei a me ka lōʻihi oki ʻoki kūpono no nā ʻano kila a me ka hao.Loaʻa iā mākou ka ʻike kūpono ma kēia kahua a hiki iā mākou ke hāʻawi iā ʻoe i nā ʻano ʻano wili hope carbide paʻa.
PM series Introduction
Optimized geometry, hoʻomaikaʻi i ka wehe ʻana i ka puʻupuʻu a me ka hana ʻana i nā puʻupuʻu me ka hoʻemi ʻana i ka ikaika ʻoki.
ʻOi aku ka nui o ka hānai ʻana a me ka hoʻomaikaʻi ʻana i ka helu hoʻoneʻe metala no ka machining maikaʻi, ma muli o ke kūpaʻa kiʻekiʻe o ka ʻoki ʻoki a me ke ʻano mea hana paʻa.
Anawaena mea hana: Ø6.0mm
ʻAno mea hana: a) PM-4E-D6.0
b） Mea hana mai nā ʻāina ʻē
mea hana
Mea hana mīkini: Mikron UCP1000
Mea hana mea hana: NAK80(40HRC)
Pūnaehana hoʻoluʻu: puhi ea
Ka hana mikini: wili ʻaoʻao (milling down)
Nā ʻāpana ʻoki: Vc=100m/min,
ap=9mm, ae=0.6mm, Fz=0.04mm~0.16mm
Me ke kūpaʻa ʻaʻahu maikaʻi a me ka paʻakikī, loaʻa ke kūpaʻa ʻaʻahu kiʻekiʻe a me ka haki ʻana i ka wā o ka wili hana kiʻekiʻe.
ʻAno mea hana: PM-4E-D6.0 ʻO ka hohonu o ka ʻoki ʻoki ʻana: ae=0.6mm
Anawaena: Ø6.0mm Kaila ʻoki: wili ʻaoʻao (milling iho)
Mea hana mea hana: NAK80(40HRC) Pūnaehana hoʻoluʻu: puhi ea
Ka holo wikiwiki: 5300r / min (100m / min) Mea hana mīkini: MIKRON UCP1000
ʻO ka māmā hānai: 1696mm/min (0.32mm/r) Ke kau ʻana o ka mea hana: 22mm
Axial oki hohonu: ap=9mm
ʻĀpana
Palapala noi
FAQ
E like me ke ʻano he nui nā ʻano, e like me ka wili hope palahalaha, ka wili hope radius, ka wili ihu pōleʻa, ka wili hopena kiʻekiʻe-feed-rate, ka wili hope ʻāʻī lōʻihi, ka wili liʻiliʻi poʻo a pēlā aku.
ʻO ka ʻokoʻa nui ka hoʻoponopono ʻana i nā koi: ʻo nā wili hope no ka wili, aʻo nā drill bits no ka wili a me ka reaming.ʻOiai i kekahi mau hihia, hiki i ka mea ʻoki milling ke wili, akā ʻaʻole ia ka mea nui.
Inā loaʻa iā mākou ke ʻano i ka waihona, e maikaʻi kekahi nui.
ʻAe, hiki iā mākou ke hoʻonohonoho iā ʻoe e like me kāu mau koi.
ʻO ka mea mua, ka mea hana.
ʻO ka lua, ʻo ke ʻano a me nā kikoʻī kikoʻī: ke anawaena shank, ke anawaena o ka ohe, ka lōʻihi o ka ohe a me ka lōʻihi holoʻokoʻa, ka helu o nā niho.
ʻO ke kolu, inā makemake ʻoe i hoʻopilikino ʻia, e hāʻawi mai iā mākou e ʻoi aku ka maikaʻi o ke kaha kiʻi.
